Disclaimer: This is the English avatar (not exactly a translation, though close) of a Spanish-language blog. I am not a native English speaker, so I would ask readers to bear kindly with this attempt (possibly too bold) and the mistakes it will entail and to accept the apologies for them I offer in advance here.
I rescued the forms/spreaders from the wood pile and returned them to their original positions along the gunwales. Then, I used them to temporarily set the the keelson in its proper position and, suddenly, the qajaq gained a third dimension.
It became an object with volume and I confess the effect did strike me quite a bit. For a while, I just stood there looking at the arrangements, or, perhaps, rather contemplating what they suggested about the future boat. As far as I can judge, it seemed all quite pleasing, though old doubts about being able to get inside did creep back at times.
The initial plan was having the keelson in place so I could determine its intersection with the end pieces, accordingly finish shaping those, set them up and, then, with end pieces and keelson temporarily in place, estimate rib lengths.
Then, I realized the keelson was already at its, proper intended depth and the end pieces were not actually required to for measuring ribs. This should allow me to cut and prepare the rib stock and set it to soaking while I finish the end pieces, build a bending jig and and get ready the steaming apparatus (thanks for the box, Xabier).
Building a replica, particularly if it is the first qajaq (actually, the first thing) you build has its problems, but, for a guy like me, it also has some advantages. You don't get to choose (and, therefore, worry) about length, width, rocker, draft or the shape of bow and stern. Supposedly, you found all those features, at the very, very least, acceptable in the original that caught your fancy. Instead, you get to worry about reproducing them in a reasonably faithful manner.
Such a situation affords many opportunities for the use of templates. Of course, I am using most of them. Among the global uncertainty that, for good or bad, will only be solved the day the qajaq is launched, templates provide most welcome interludes of relative safety. As the pics show, shaping the stem pieces has just presented me with one of these precious moments.
And it seems to be working.
Note: Bow piece at the top, stern piece at the bottom.
After quite a while, I've returned to working on the future qajaq. I am tackling the stem pieces so, with the aid of the forms I can do a mock installation of the keelson and, from there, estimate rib lengths.
As usual, it's proved exciting, with moments of doubt, moments when you are certain that you have messed up things big time and the moments of immense relief when you realize you either actually had it right, or it wasn't so bad, after all.
Which means something like "rushing river" and is the name of a village and, more relevantly, a river in Greece, in the Phtiotis, near its capital city of Lamia, some 250 km north of Athens.
"More relevantly", not because said river provides, as far as I can tell, any good paddling. Well, maybe it does outside the stretch I know. Rather, because, in that part, it forms a canyon (readers of exceptional fidelity and memory may remember that I consider canyoning and paddling activities that essentially share the same ethos, though).
Actually, it forms a big canyon. A canyon, perhaps not very famous, but with a certain reputation, often considered among the greatest in Europe and, possibly, the world. The reputation probably has something do with its having lots of water (so much at times that some years it has not been descended at all) and no known exits once you are in and with its 4.5 km in which it goes down 850 m. But also with things about which those numbers don't say anything: its enormous beauty and grandeur, the magnificent spruce forests of its headwaters and a certain feeling of remoteness and epic loneliness that pervades the whole activity.
It happened that our Dolomismo friends, Santi and Annabella, were on climbing-canyoning holidays in the Balkans in early Ocotber, and invited us to join them and another friend, Elíes, for a go at Gorgopotamos and a bit of fooling around in other canyons in the area. We couldn't say no.
Fortunately.
Note: As usual, pictures not mine. Credits and thanks go to Santi and Annabella. There are some more of their Gorgopotamos photographs here and a more more proper chronicle (in Italian) here. Also, this YouTube video of a descent by another group should help in getting an idea of the kind of place that is Gorgopotamos. Thanks also to Thomas Georgas and the Alpina XOOOL Club from Lamia for their hospitality and help with information.
2009 has brought a number of substantial changes to my kayaking. Some are very evident. For example: going into my garage it is hard not to notice that where a single kayak used to lie comfortably I am now trying to squeeze two plus the in-progress frame of the traditional SOF I am spasmodically building. And none of the two kayaks is the old one.
Chronologically, the Spartan came first and shared the garage with my old Creus for a time. The Spartan 4.6 is Fun Run Kayaks' faithful (and beautiful), fiberglass rendition of a West Greenland kayak. The key ingredients are all there: low volume, hard chines, low decks, relatively narrow beam, pointy, overhanging ends... However, at just 4.60 m long (and 50 cm wide), the Spartan seems to derive some inspiration from the recent rolling qajaqs besides the traditional hunting ones. The video below should give a fair idea of how the Spartan looks
The way I became its owner makes this kayak quite special to me. It came as the 2nd prize of a contest generously sponsored by its maker, Fun Run Kayaks. This was probably the only way I might ever get this boat. I knew it, I liked it (actually, I loved it), I had longingly looked at pictures of it again and again. However, I always regarded it as too much of a whim. One in which I was not going to indulge.For someone of my size, the Spartan 4.6 cannot cannot really work well for multiday trips. Even overnighters would be stretching it and I do both every now and then. Hence what I really need is a more versatile boat, that performs well with a load, but also in day trips. Moreover, at my current skill level, a 50 cm wide, low volume kayak should prove a bit of a challenge if conditions become "interesting".
In fact, I would guess that the Spartan 4.6 was originally largely conceived as a "roll & play" boat (and there is a minimalistic "roll&play" version) to practice and enjoy the rich repertoire of traditional Greenland maneuvers. Then the boat showed its seaworthiness and that it could shine as a day boat and I would say that most Spartans out of there are actually functioning in this role. That does not mean it does not perform brilliantly as a rolling qajaq. As the video below should show, in the right hands (not mine!), it is quite the opposite.
How has it been paddling the Spartan for me? As a certified non-expert, my opinion is not terribly relevant, but anyway: it has been a true delight. I find it light, quick to accelerate, capable to sustain typical cruising speeds with little effort, remarkably unaffected by the wind and straight-tracking (I suppose the integrated skeg in its keel line has something to do with these two features), yet very easy to maneuver. So far, in the moderate conditions I've had it out it has always been a joy to paddle it.
Note: As usual photos not by me (nor the videos). Authors of the pics, if I recall correctly, are Javier (from Salamanca), César, and another Javier.
The date of the prior entry makes quite obvious that I have not been exactly attentive to this blog. And it's not just that I've been doing stuff and not writing about it (which I have). Possibly worse, it's that I have been similarly lazy in the construction of my qajaq. There have been no progress.
Partly, this is because I am typically more distracted during springs and summers. I have more work, but also there's canyoning, hiking and, yes, paddling too and this takes time from the building and writing. Partly, of course, it is because of straight laziness.
Nonetheless, when going down canyons or walking in the mountains the qajaq has never been far from my mind (I guess that's why it feels unfaithful) and I have often stopped to pick up chunks of hardwoods (which I have had to lug around for a bit in a few occasions) in which I see future pieces for the deck lines of the boat. You can see some in the pic. Boxwood from the Sierra de Guara and holm oak from the hills right beside home.
I am a big believer in patterns. I can manage drawing of a kind by using computer software and I love making patterns for pieces in paper, cardboard, vinyl acetate, whatever... then cutting them and tracing their outline on the wood. It gives me a confidence I otherwise lack and, thus, alleviate somewhat the doubts and builder angst that I tend to suffer. In the past, I've resorted to patterns for things as simple as Greenland paddle tips. Above, you can see what I came up with for the two curved deck beams that my qajaq will have, beam # 5 (top) and the masik (bottom).
After a less than fluid relationship with a circular saw and a piece of ash, this is what I ended up with for beam #5, together with a new toy, I mean, tool. It actually proved quite useful and fun to use. The piece has been now installed and I have a quite solid deck structure where only the masik is still missing. It will remain like that for a while, though, as I plan to tackle stem and stern pieces next and leave the masik for the very final stages.